Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

A semi-rigid bis(imidazolyl) ligand for the construction of nanoscopic supramolecules. From the molecular rectangle to the 1D coordination polymer

Reaction of the semi-rigid ligand 2,4-bis(1-imidazolylmethyl)-mesitylene (m-bimms) with CdCl₂ afforded a boat-like molecular rectangle [Cd(m-bimms)Cl₂]₂ · 1/2H₂O (1), with the orientation of the two imidazolyl arms of the ligand in syn-conformation and bridging chloride ions bisecting the macrocycle. Weak Cl· · ·H—C interations further extended the dimers into 1D infinite chains with nanoscopic channels. An analogous reaction with Cd(NO₃)₂ gave a 1D coordination polymer [Cd(m-bimms)₂(NO₃)₂]_n · 2nH₂O (2) composed of nanoscopic metallamacrocycles, where the two imidazolyl arms adopt an anti-conformation. Different anions result in different ligand conformations and thus determine the varied molecular architectures.     

Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

分数导数结合傅里叶最小二乘拟合处理含噪音的重迭信号

提出了一种含噪音重迭信号的综合处理方法 :先用傅里叶最小二乘法拟合噪音数据 ,然后对拟合后的信号求 2 .5次导数 ,在对模拟数据研究的基础上 ,讨论了求导后峰位漂移及其影响因素 ,给出了一个用于矫正峰位值的经验公式。用该方法对模拟和实际的紫外含噪音重迭信号进行处理 ,结果良好     

聚合物介质中盐离解行为的温度依赖性研究

<正> 近十年来尽管聚合物-盐复合物作为潜在的理想电解质材料已得到广泛研究,人们对于在象聚合物这样的高粘度介质中盐的离解行为仍缺乏了解。特别是关于盐离解度的温度依赖性,不同的作者对相似的体系曾得出截然相反的结论。最近,Angell和许康等相继通过不同研究途径证实了在上述介质中盐离解产生的自由离子数n随温度上升而下降,其趋势可由Arrhenius公式表示:     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

Octasilsesquioxane Chemistry II. Hydrosilylation Reaction of Octa(hydrido)silsesquioxane with Unsaturated Substrates and Product Properties

The hydrosilylation reaction of octa(hydrido)silsesquioxane with ω‐halo‐1‐alkenes and other unsaturated substrates allows attachment of 8 long‐chain functionalized alkyls on the cubic Si₈O₁₂ skeleton. Pt/C and H₂PtCl₆ have been adopted as the catalysts, the yields being 74–98% for compounds 2–9 . For terminal alkenes, the hydrosilylation follows the anti‐Markonikov's rule. The morphological state of 2–9 ranges from viscous liquid to crystalline materials. The pyrolysis results indicate that 7 , a material of hard spherical core and soft flexible shell, may likely act as nanometer‐size ball bearings up to more than 400 °C. The X‐ray structure of 9 reveals that the molecule is required to possess a center of symmetry crystallographically. The linear arms on 9 , except for two of them, are virtually all‐trans in conformation, not counting the ω‐C‐Cl bond.     

P-507回流萃取法富集镥的研究——Ⅰ.P-507萃取分离镱镥混合稀土的性能

本文研究了2-乙基己基膦酸单2-乙基己基酯(P-507)在盐酸和硝酸体系中萃取镱镥混合稀土的性能。说明P-507在硝酸体系中的萃取分离系数较其在盐酸体系中高,而在盐酸体系中有更高的反萃效率。与二(2-乙基己基)磷酸(P-204)相比,P-507具有萃取酸度低、易反萃和不易乳化的优点。我们还确定了回流萃取法分离镥镱的基本参数,表明P-507是一种新型的分离重稀土的良好萃取剂。     

A Study on Alkyl Polyglycosides of the Starch

The alkyl polyglycosides (APG) is new type the surfactants that is made by regenerationresource of the starch and the grease, since the nineties of 20th century it is energetically exploited ininternational extent. APG not only good in surface activity, but also plenty on bubble, thin greasyand stabilization, there are good decontamination, compatibility, innocuity, not incitation and uniquefunction that organism decomposition of swiftness and downrightness, and so on.APG is to get production that loses one molecule water with half condensation aldehyde hydroxyand sebum alcohol hydroxy under acid catalysis. The production not is one simplicity compound, butis one of sugar polymerization degree, so it is mixture of the alkyl single glucoside, the alkyl twoglucoside and the alkyl three glucoside.Author synthesizes the surfactants of the alkyl polyglycosides, with the oleaster and potato starchand sebum alcohol, that was chosen to use duality system activator of plant acid and p-toluene-sulfoacid for the first time. The adoption way is that the lower alkyl polyglycosides is firstly formed byreaction of lower alcohol with starch then exchanged with high alcohol to obtain APG. The study isto make certain most technics condition, determining capillary tension and the pastern sheafdeepness of critical, calculating HLB value, determining construction by 1R.To synthesize principium:Peroration :[1]Duality system activator of plant acid and p-toluene-sulfo acid is compare idea activator that was the lower alkyl polyglycosides is firstly formed by reaction of lower alcohol with glucose then exchanged with high alcohol to obtain high alkyl polyglycosides. The advantage is that it overcomes agglomeration, there is reaction entirety, high of sugar transform ratio, reaction time short.[2]Most good reaction temperature is 90～ 170℃, the dosage of activator is 0.5%～0.9%, the mated ratio: The APG of glucose basic butane ratio starch is 5:1, the APG of potato starch basic glycol ratio starch is 6:1, the APG of the oleaster starch basic glycol ratio starch is 12:1, the APG of the mealiest starch basic glycol ratio starch is 6:1, the product of complex is good property.[3]The alkyl polyglycosides is the products of surfactant. IR determines the functional group of the products. On the basis of group of the hydrophile and to close on oil, that the feature peak of α-1, 4- glucoside.[4]The capillary tension of the APG is 26.8～31.0mN/m, the HLB value is 16～18, the products is better emulsifying agent of water- solubility. (O/W).